This application is used to demonstrate SIC4310 NFC Enabler development kits developed by Silicon Craft Technology Ltd
This application is used to demonstrate SIC4310 NFC Enabler development kits developed by Silicon Craft Technology Ltd. (SIC). The NFC Enabler (SIC4310) is a dual-interface ISO14443A RFID tag, interfacing with both RF and UART. NFC Enabler is designed to be used in a various types of applications such as home appliances, personal healthcare, sport and fitness devices, etc. The key challenge is to deploy a low-cost NFC tag instead of an expensive full functional reader IC and use smartphones as a
hub of information. As a result, this concept will enable a tremendous number of NFC applications on the smartphones.See demos on our YouTube channel at https://www.youtube.com/user/SiliconCraftMain features of SIC4310- RF interface based on ISO14443A at 106 kbps- UART interface 9600 to 115200 bps- 8 programmable GPIOs- Activity indicator pins (RF detection, RF busy and power ready)- 228-byte EEPROM accessible from RF and UARTNOTE:The application only supports NFC Enabler SIC4310 ICs from Silicon Craft Technology.The demo applications are as follows.1. GPIOs control2. LEDs control3. Firmware upgrade through NFC4. LCD control5. Temperature sensor 6. File transfer 7. SIC commands8. Melody9. Interactive poster10. E-ink Camera11. Room Controller 12. NDEF editorThe development kits are provided in five different forms.1. SIC4310-MC: a 12.5 x 19.7 mm micro module with a UART interface and 4 GPIOs2. SIC4310-USB: a 12.5 x 37.3 mm tiny module with a USB interface3. SIC4310-HV: an energy harvesting module with a UART interface and 3 GPIOs. The on-board inductive antenna can generate a current up to 10 mA.4. SIC4310-HVU: an energy harvesting module featuring UART and USB interfaces and two LEDs that can be controlled via GPIO pins. The on-board inductive antenna can generate a current up to 10 mA.5. SIC4310-FU: 47.6 x 107.9 mm ready-to-use kit featuring ARM Cortex M0 MCU, SIC4310, LCD, inductive antenna, two function buttons, temperature sensor, and connectors (I2C, SPI, UART, programming and debugging)6. SIC4310-SP: a customizing board as e-ink, springboard etc.Please contact support@sic.co.th if you have problems or feel free to contact us if you have any suggestions for additional features. This helps us to detect, analyze and fix possible issues you may encounter when using our demo application.Version 1.0Updated on Aug 26, 2013Version 1.01Updated on Aug 28, 2013Version 1.02Updated on Sep 2, 2013Version 1.03Updated on Sep 6, 2013Version 1.04Updated on Sep 12, 2013Version 1.05Updated on Sep 22, 2013Version 1.06Updated on Oct 14, 2013Version 1.07Updated on Oct 18, 2013Version 1.08Updated on Oct 28, 2013Version 1.09Updated on Dec 12, 2013Version 1.10Updated on Jan 13, 2014Version 1.11Updated on Jan 17, 2014Version 1.12Updated on Mar 21, 2014Version 1.13Updated on Apr 29, 2014Version 1.14Updated on May 5, 2014Version 1.15Updated on May 8, 2014Version 1.16Updated on May 9, 2014Version 1.17Updated on Jun 12, 2014Version 1.18Updated on Jun 26, 2014Version 1.19Updated on Jul 2, 2014Version 1.20Updated on Jul 18, 2014Version 1.21Updated on Aug 28, 2014Version 1.22Updated on Sep 9, 2014
... moreless ...